Loading ...
Loading ...
Loading ...
Switching on/off
Switching on automatically
The system switches on automatically in the fol‐
lowing situations:
▷ If selector lever position R is engaged while
the engine is running or in electric mode.
The rearview camera also switches on.
▷ If equipped with front PDC: when obstacles
are detected behind or in front of the vehicle
by PDC and the speed is slower than approx.
2.5 mph/4 km/h.
You may switch automatic activation on and off
when obstacles are detected. Via iDrive:
1.
"My Vehicle"
2. "Vehicle settings"
3. "Parking"
4. "Automatic PDC activation": depending on
the vehicle equipment.
5. "Automatic PDC activation"
The setting is stored for the driver profile cur‐
rently used.
If necessary, switch off automatic PDC activation
on obstacle detection, for instance in vehicle
washes, to reduce false alarms.
Automatic deactivation during forward
travel
The system switches off when a certain driving
distance or speed is exceeded.
Switch the system back on, if needed.
With front PDC: switching on/off manually
Press park assistance button.
▷ On: the LED lights up.
▷ Off: the LED goes out.
The rearview camera image is displayed if the re‐
verse gear is engaged when pressing the park
assistance button.
WARNING
Signal tones
An intermittent tone indicates when the vehicle
is approaching an object. E.g., if an object is de‐
tected to the left rear of the vehicle, a signal tone
sounds from the left rear speaker.
The shorter the distance to the object, the
shorter the intervals.
If the distance to a detected object in the front is
less than approx. 12 inches/30 cm and in the rear
less than approx. 20 inches/50 cm, a continuous
tone is sounded.
With front PDC: if objects are simultaneously lo‐
cated both in front of and behind the vehicle, an
alternating continuous signal is sounded.
The signal tone is switched off, when selector
lever position P is engaged on vehicles with
Steptronic transmission.
Volume
The ratio of the PDC signal tone volume to the
entertainment volume can be adjusted.
Via iDrive:
1.
"My Vehicle"
2. "iDrive settings"
3. "Tone"
4. "Volume settings"
5. "PDC"
6. Set the desired value.
The setting is stored for the driver profile cur‐
rently used.
Seite 161
Driving comfort
CONTROLS
161
Online Edition for Part no. 01402989296 - II/18
Loading ...
Loading ...
Loading ...