Loading ...
Loading ...
Loading ...
For example, the sensors are unable to detect
fog or hazy weather. To avoid safety risks under
these conditions, you should always switch on
the lights manually.
Daytime running lights
General information
Position of switch: , ,
The daytime running lights light up when
standby state is switched on. After standby state
is switched off, the parking lights light up in posi‐
tion .
Activating/deactivating
In some countries, daytime running lights are
mandatory, so it may not be possible to deacti‐
vate the daytime running lights.
Via iDrive:
1.
"My Vehicle"
2. "Vehicle settings"
3. "Lighting"
4. "Exterior lighting"
5. Select the desired setting.
Settings are stored for the profile currently used.
Adaptive headlight range
control
The adaptive headlight range control compen‐
sates for acceleration and braking operations in
order not to blind the oncoming traffic and to
achieve optimum illumination of the roadway.
High-beam Assistant
Concept
The high-beam Assistant detects other traffic
participants early on and automatically switches
the high beams on or off depending on the traffic
situation.
General information
The high-beam Assistant ensures that the high
beams are switched on, whenever the traffic sit‐
uation allows. In the low speed range, the high
beams are not switched on by the system.
The system responds to light from oncoming
traffic and traffic driving ahead of you, and to am‐
bient lighting, for instance in towns and cities.
The high beams can be switched on and off
manually at any time.
Activating/deactivating
Position of switch, depending on the vehicle
equipment: ,
Press and hold button on signal lever.
The indicator light in the instrument clus‐
ter is illuminated when the low beams are
switched on.
The headlights are automatically switched be‐
tween low beams and high beams.
The blue indicator light in the instrument
cluster lights up when the system
switches on the high beams.
The high-beam Assistant is deactivated when
manually switching the high beams on and off,
refer to page 106.
To reactivate the high-beam Assistant, press the
button on the turn signal lever.
Seite 136
CONTROLS
Lights
136
Online Edition for Part no. 01402989296 - II/18
Loading ...
Loading ...
Loading ...