Loading ...
Loading ...
Loading ...
43
Part Names
Before Use
• POWER ON (green) : Lights up or flashes under normal conditions when the
power is on.
• WARNING (red) : Lights up or flashes when an error occurs.
• LAMP (orange) : Flashes when the time for replacing the lamp is near.
When a lamp cover error occurs, the [WARNING]
indicator will also flash. When a lamp error occurs, it will
illuminate at the same time as the [WARNING] indicator.
• TEMP (red) : When the temperature inside the projector is high, it will
flash. If the temperature inside the projector increases
further and a temperature error occurs, it will illuminate at
the same time that the [WARNING] indicator illuminates.
■ LED Indicator Displays
The LED indicators flash or illuminate to indicate the operating status of the
projector.
: Off : Lit : Flashing
LED indicator
Operating status
POWER
ON
(green)
WARNING
(red)
LAMP
(orange)
TEMP
(red)
A projector is not plugged in.
Power is on.
A projector is in standby mode (blinks slowly:
every 4 seconds).
Waking from or entering standby mode (blinks:
every second).
The time for replacing the lamp is near. (In standby
mode.)
The time for replacing the lamp is near. (During
projection)
Internal temperature is high.
A lamp error has occurred.
Power was turned off due to high internal
temperature.
The lamp cover is open.
Another error has occurred.
Loading ...
Loading ...
Loading ...