Loading ...
Loading ...
Loading ...
8
CHEF’S KNIVES AND PARING KNIVES
The blade of a well designed chef’s knife is curved continuously from the blade tip to the end
near the handle so that, with a rocking action on a cutting surface, the entire blade length will
cut cleanly. Chef’sChoice
®
will sharpen the entire blade uniformly, avoiding a swale common to
other sharpening methods. If your chef’s knife has a heavy bolster near the handle extending
to the edge, a commercial grinder can modify or remove the lower portion of the bolster so the
bolster will not interfere with proper cutting action of the knife.
Chef’sChoice
®
Professional Model 110 will sharpen the entire cutting edge from tip to bolster
or handle. For this reason, when using paring knives, it is essential to exercise extreme care to
keep fingers away from the incredibly sharp edge near the handle.
SPORTING AND POCKET KNIVES
The Professional 110 is the ideal sharpener for your favorite sporting and pocket knives. It will
put the same incredibly sharp Trizor
®
edges on the entire length of these blades from the tip to
the bolster. See “Suggestions” section.
NORMAL MAINTENANCE
No lubrication is required for any moving parts, motor, bearing surfaces or sharpening surfaces.
Your sharpener may be cleaned by carefully wiping with a damp cloth. Do not use detergents
or abrasives.
To clean metal dust that may accumulate in the PRE-SHARPENING section, simply remove the
circular plastic plug that is located on the underneath side of the sharpener. Shake out the metal
dust and replace plug. You may wish to do this once every eighteen months with normal usage
or more often with heavy use.
SERVICE
In the event post-warranty service is needed, return your sharpener to the EdgeCraft factory where
the cost of repair can be estimated before the repair is undertaken. Please include your return
address, daytime telephone number and a brief description of the problem or damage on a
separate sheet inside the box. Retain a shipping receipt as evidence of shipment and as your
protection against loss in shipment. Outside the USA, contact your retailer or national distributor.
Assembled in the U.S.A. www.chefchoice.com
This product may be covered by one or more EdgeCraft patents and/or patents pending as marked on the product.
Chef’sChoice
®
, EdgeCraft
®
, Trizor
®
, Diamond Hone
®
and the overall design of this product are registered
trademarks of EdgeCraft Corporation, Avondale, PA.
Conforms to UL Std. 982 Certified to CAN/CSA Std. C22.2 No. 64
Certified to EN 60335-1, EN 60335-2, EN 55014-1+A1, EN 61000-3-2, EN 61000-3-3
© EdgeCraft Corporation 2016
F16 C1182Z2
®
EdgeCraft Corporation
825 Southwood Road, Avondale, PA 19311 U.S.A.
Customer Service (800) 342-3255 or 610-268-0500
Loading ...
Loading ...
Loading ...