Loading ...
Loading ...
Loading ...
24
21. DISPLAYED MESSAGES
DISPLAYED MESSAGE POSSIBLE CAUSE SOLUTION
FILL TANK WITH FRESH
WATER
Insucient water in the tank (A16). Fill the tank with water and/or insert it cor-
rectly, pushing it as far as it will go until it
clicks into place.
INSERT WATER TANK
The tank (A16) is not correctly in place. Insert the tank correctly and press as far as it
will go.
EMPTY GROUNDS CONTAINER
The grounds container (A10) is full.
Empty the grounds container and drip tray
(A14), clean and replace. Important: when
removing the drip tray, the grounds container
must be emptied, even if it contains few groun-
ds. If this is not done, when you make the next
coees, the grounds container may ll up more
than expected and clog the machine.
INSERT GROUNDS CONTAINER
After cleaning, the grounds container has not
been replaced (A10).
Remove the drip tray (A14) and insert the
grounds container.
ADD GROUND COFFEE MAX.
ONE MEASURE
ESC
The pre-ground coee function has been se-
lected without placing any “pre-ground coee”
in the funnel (A4).
Place pre-ground coee in the funnel (g. 13)
and repeat delivery.
Loading ...
Loading ...
Loading ...