Loading ...
Loading ...
Loading ...
23
19. TECHNICAL DATA
Voltage: 220-240 V~ 50/60 Hz max. 10 A
Power: 1450 W
Pressure: 1,5 MPa (15 bar)
Water tank capacity: 2 l
Size LxDxH: 260x480x375 mm
Cord length: 1750 mm
Weight: 11,9 kg
Beans container capacity: 400 g
The appliance complies with the following EC
directives:
• European Standby Regulation 1275/2008
• Materials and accessories coming into contact with food
conform to EEC regulation 1935/2004.
20. DISPOSAL
The appliance must not be disposed of with house-
hold waste, but taken to an authorised waste separa-
tion and recycling centre.
The lter is now active and you can use the coee machine.
18.2 Replacing the lter
Replace the lter (C4) when “REPLACE WATER SOFTENER FILTER,
PRESS OK TO START
”appears on the display (B). To replace
the lter immediately, press “OK ” and follow the instructions
from point 4.
To replace the lter later, press the selection arrow correspond-
ing to “
ESC”. The symbol appears on the display to
remind you that the lter needs replacing.
1. Extract the tank (A16) and exhausted lter;
2. Remove the new lter from the packaging;
3. Press the selection arrow (B2) corresponding to the “
”
symbol (B8) to enter the menu;
4. Press the selection arrow corresponding to “
REPLACE
WATER FILTER”;
5. Follow the operations described in the previous section
from point 5.
The lter is now active and you can use the coee machine.
Please note!
After two months (see date indicator) or when the appliance has
not been used for 3 weeks, you should replace the lter even if
the message has not yet been displayed.
18.3 Removing the lter
Replace the lter (C4) when “REPLACE WATER SOFTENER FILTER,
PRESS OK TO START
” appears on the display (B). To re-
place the lter immediately, proceed as follows:
1. Extract the tank (A16) and exhausted lter;
2. Press the selection arrow (B2) corresponding to the “
”
symbol (B8) to enter the menu;
3. Press the selection arrow corresponding to “REMOVE
WATER FILTER
”;
4. “
CONFIRM FILTER REMOVAL”: to conrm press the
selection arrow corresponding to “OK ”
(to go back to the
settings menu, press the selection arrow corresponding to
“ ESC”)
;
5. “
REMOVE FILTER COMPLETED”: the change has
been saved. Press
“OK ”
to go back to the homepage.
Please note!
After two months (see date indicator) or when the appliance has
not been used for 3 weeks, you should replace the lter even if
the message has not yet been displayed.
Loading ...
Loading ...
Loading ...