Loading ...
Loading ...
Loading ...
- 8 - SUMMIT 201805 GAS OVEN
SGWO30SS MANUAL
OVEN DOOR
To remove oven door
1) Fully open the oven door.
2) Insert a metal Locking Pin (B) in the Locking Hole (A) on each of the hinges. (Fig. 07)
3) Grasp the door by the sides toward the back. Raise the front of the door a few inches
and make sure the Locking Pin (B) is locked by the door hinge. This will prevent the
hinge from snapping closed when the door is removed. (There will be some spring
resistance to overcome because of the hinge being locked). When the front of the door
is high enough and hinges are locked, you will be able to lift the hinges to clear the
slots.
4) Pull the hinges out of the slots in the oven front frame.
To replace the oven door
1) Grasp the sides of the door at the center. Insert the ends of the hinges and fix hinge
slots in the oven front frame.
2) With the door open all the way, pull out the two Locking Pins (B) from the hinge
Locking Holes (A).
3) Raise the oven door and make sure it fits evenly with the front sides.
WARNING: Never take out the Locking Pins while the door is off. Do not close the hinges
without the weight of the door. The powerful springs will snap the hinges closed with
great force.
CAUTION: Do not place excessive weight or stand on an open oven door. This could
cause the range to tip over, break the door, or injure the user. Also, do not attempt to
open or close door or operate oven until door is properly replaced.
REPLACING THE OVEN LIGHT
WARNING: To prevent electrical shock and or personal injury:
1) Before replacing the light bulb, be sure the electric power is turned off at the circuit
breaker.
2) Do not operate the oven unless the light cover is securely in position.
3) Be sure the oven and light bulb are cool.
4) Do not touch hot bulb with a damp cloth as this may cause the bulb to break.
5) If the light cover is damaged or broken, do not use the oven until a new cover is in
place.
To replace oven light bulb:
1) Before replacing light bulb, disconnect oven electric circuit.
2) Remove oven racks.
3) Remove by unscrewing lens bulb cover and light bulb.
4) Replace bulb with a 25 W – 120 VAC appliance bulb only.
5) Replace lens bulb cover.
6) Reconnect power to range. Reset electronic clock.
Loading ...
Loading ...
Loading ...