Loading ...
Loading ...
Loading ...
- 7 - SUMMIT 201805 GAS OVEN
SGWO30SS MANUAL
CAUTION:
1) Do not store or use gasoline or other flammable vapors, liquids or items in the vicinity of
this or any other appliance.
2) Never use appliance as a space heater to heat or warm a room.
3) Do not obstruct the flow of combustion and ventilation air by blocking the room vents or
air intakes. Restriction of air flow to the gas appliance prevents proper performance and
increases carbon monoxide emission to unsafe levels.
4) Continuous use of the appliance may require extra ventilation. This can be
accomplished by opening a window or increasing exhaust power of a cooking hood.
5) If flame should go out during operation, turn the burner off. If a strong gas order is
detected, open a window and wait five minutes before relighting the burner.
6) Be sure all control knobs are set in the OFF position prior to supplying gas to the oven.
MAINTENANCE
CLEANING SAFETY
Turn off all controls and wait for appliance parts to cool before touching or cleaning them.
Do not touch the burners, oven inner surface or surrounding areas until they have had
sufficient time to cool.
Clean appliance with caution. Use care to avoid steam burns if a wet sponge or cloth is
used to wipe spills on a hot surface. Some cleaners can produce noxious fumes if applied
to a hot surface.
SURFACE AND OVEN COOKING CAVITY CLEANING
This is easily done using a damp cloth and a non-abrasive detergent. Wipe using a soft dry
cloth. For stainless steel parts with stubborn stains, use only a plastic scrubbing pad or
sponge with vinegar and warm water.
Because of the many new cleaning products introduced in the marketplace each year, it is
not possible to list all products that can be safely used to clean this appliance. Read
carefully the cleaner manufacturer’s instructions to be sure the cleaner can be safely used
on this appliance. To determine if a cleaning product is safe, test a small inconspicuous
area using a very light pressure to see if the surface is scratched or discolored. This is
particularly important for porcelain, enamel, and highly polished, shiny, painted or plastic
surfaces.
ABNORMAL OPERATION
Any of the following are considered to be abnormal and may require servicing:
- Burner flame with yellow tips
- Difficult burner ignition
- Burners fail to remain lighted
- Burner flames out
- Difficulty turning gas valves.
Loading ...
Loading ...
Loading ...