Loading ...
Loading ...
Loading ...
Page:
7
User Manual:
Your Esatto Cooktop (Continued)
CONTROLS
The following symbols will appear on the control panel, next to each control knob:
● Gas o Large ame: maximum setting Small ame: minimum setting
→ The minimum setting is at the end of the anti-clockwise rotation of the control knob.
→ All operation positions must be selected between the maximum and minimum position.
→ Never select a knob position between the maximum and o position.
Burner indicator
→ The symbol above indicates which gas burner the knob operates.
AUTOMATIC IGNITION WITH FLAME FAILURE SAFETY DEVICE
Your Esatto cooktop is tted with a ame failure safety device on each burner, which is designed to stop the ow of gas
to the burner head in the event of the ame going out.
To ignite a burner:
→ Press in the control knob of the burner that you wish to light and turn it anti-clockwise to
the maximum position.
→ If you keep the knob depressed, the automatic ignition for the burner will operate.
→ You should hold down the control knob for 10 secs after the ame on the burner has lit.
→ After this 10-second interval, turn the control knob to your required setting between the
maximum and minimum setting symbols.
→ To switch the burner o, turn the control knob fully clockwise to the gas o position.
→ In case of power failure, the burners can be lit by carefully using a match.
SUITABLE PANS
Refer to the chart below and ensure that the pan diameter falls within the minimum and maximum diameters given for
the burner to you using. A pan base which is too small will be unstable on the pan support. If the pan diameter is too
large, ames can spread out to the sides and damage or burn the worktop, wall claddings or surrounding units and also
parts of the cooktop. The manufacturer cannot be held liable for this type of damage.
→ Wide, shallow pans are preferable to tall, narrow ones. They will heat up faster.
→ Select pans which are suitable for the burner they are to be used on. In general: use
larger diameter pans on the large burners, and smaller diameter pans on the small
burners.
→ Pans with thick bases are preferable as these distribute heat more evenly. With thin
bases, there is a danger of food overheating in places. Stir the food frequently.
→ Any heat-resistant pans can be used on a gas burner.
→ Always place the pan on the pan support supplied with the cooktop. Do not place a pan
directly on top of the burner.
→ Remember when purchasing new pans that manufacturers usually refer to the diameter
at the top of the pan in their documentation.
→ Use a lid whenever possible to minimise heat loss.
→ When using a wok make sure that the base does not touch the burner. A distance of 1 cm
should be maintained between the burner and the base of the wok pan above it.
WARNING! Place pots and pans at on the cooktop trivets to ensure they do not tip over. Slight tilting cannot always
be avoided.
Burner
Min.
pan
base
diameter
in
cm
Small
burner
10
Mediumburner
12
Large
burner
14
Wok
burner
14
Max.
diameter
at
top
of
pan
in
cm
Smallburner
22
Mediumburner
22
Largeburner
24
Wokburner
24
Burner
Min.
pan
base
diameter
in
cm
Smallburner
10
Mediumburner
12
Largeburner
14
Wokburner
14
Max.
diameter
at
top
of
pan
in
cm
Small
burner
22
Medium
burner
22
Large
burner
24
Wok
burner
24
Loading ...
Loading ...
Loading ...