Loading ...
Loading ...
Loading ...
Engine servicing
4-14
4-14
(1) THROTTLE DRUM COVER
(2) SCREWS
Connect the throttle cable end to the throttle drum.
Install the throttle cable to the throttle body.
Adjust the throttle grip free play.
Install the throttle drum cover and tighten the screws.
(1) THROTTLE CABLE END (2) THROTTLE DRUM
(3) THROTTLE CABLE (4) LOCK NUT
(1) SCREW
(2) INSULATOR
(3) ALIGN
Loosen the lock nut, then disconnect the throttle cable
from the throttle body.
Then disconnect the cable end from the throttle drum.
Loosen the insulator clamp screw, then remove the
insulator from the throttle body.
Installation
Install the insulator onto the throttle body while aligning
its slit with the lug on the throttle body as shown.
(1) LOCK NUT (2) THROTTLE CABLE
(3) THROTTLE CABLE END (4) THROTTLE DRUM
(1) SCREWS
(2) THROTTLE DRUM COVER
Disconnect the ECM 32P (Black) connector.
Loosen the insulator band screw, then remove the throttle
body.
Be careful to not pull connector from throttle body, pull
up fixation handle.
Remove the screws and throttle drum cover.
(1) 32P (BLACK) CONNECTOR
(2) BAND SCREW
(3) THROTTLE BODY
3
2
1
2
1 1
3 1
4 2
2 3
1 4
3
2
1
1
2 2
Loading ...
Loading ...
Loading ...