Loading ...
Loading ...
Loading ...
4-11
4-11
Engine servicing
(1) BEARING
(2) PUMP
Assembly
Insert the body in the pump system.
Make sure that the pawls are tightly closed and that the
two pieces are perfectly positioned.
Insert a new bearing in its housing in the tank as shown.
Insert the pump in the tank, taking special care not to
damage the bearings. Apply a small amount of engine oil
for installation.
Make sure that the bearing is properly positioned and sup-
ported in the fuel tank.
(1) PUMP (3) PAWLS
(2) BODY (4) CONNECTING PIPE
(1) BEARINGS
(2) PUMP
(3) ENGINE CABLES
(4) MOTOR
(5) BODY
Replace the bearings with new ones every time the fuel
pump is disassembled.
Clean the contact surface between the pump and the fuel
tank. Install new bearings. Apply a small amount of engi-
ne oil for installation.
Thread the engine cables through the holes and connect
them to the terminals.
Insert the pump engine in the body.
Be careful not to damage the cables
Clean the surface of the filter.
(1) FILTER SURFACE
5
4
3
2
1
1
1
2
3
3
2
1
4
Loading ...
Loading ...
Loading ...