Loading ...
Loading ...
Loading ...
6-14
6-14
Electrical servicing
(1) 2P CONNECTOR FOR THE BRAKE LIGHT SWITCH(1) BRAKE LIGHT LAMP
Checking indicator line:
Connect, when shorted, the terminals of the connector
2P (white) of the indicator relay with a jumper wire.
Connection: RBlack – Black
Start the engine and move the indicator switch to position
or .
Check that the indicator lights are working.
If the indictor lights come on, replace the indicator
relay with one that you know is working correctly and
carry out the checks again.
If the indicator lights are not working, check to see if
there is an open circuit in:
- Yellow/green wire (left side)
- Blue/red wire (right side)
- Green wires for the indicators.
Brake light.
If the engine starts but the brake light does not work,
check the following:
Bulb blown or not of the specified wattage.
Loose connector.
Open circuit in the Black wire between the ignition
relay and the brake switch.
Brake light switch.
Front:
Disconnect the connector 2P from the front brake light
switch.
There should be continuity with the brake lever applied,
and there should be none when this lever is not applied.
1
1
Loading ...
Loading ...
Loading ...