Loading ...
Loading ...
Loading ...
Practical information
228
Fitting the "space-saver"
spare wheel
If your vehicle is fitted with alloy wheels,
when tightening the bolts on fitting it
is normal to notice that the washers
do not come into contact with the
"space-saver" spare wheel. The wheel
is secured by the conical contact of
each bolt.
After changing a wheel
To store the punctured wheel in the
boot correctly, first remove the central
cover.
When using the "space-saver" type
spare wheel, do not exceed 50 mph
(80 km/h).
Have the tightening of the bolts and the
pressure of the spare wheel checked
by a PEUGEOT dealer or a qualified
workshop without delay.
Have the punctured wheel repaired and
replace it on the vehicle as soon as
possible.
Position the base plate of the jack on the
ground and ensure that it is directly below
the location
A
or
B
used.
Extend the jack until its head is in contact
with
A
or
B
.
Raise the vehicle until there is sufficient
space between the wheel and the ground
to admit the spare (not punctured) wheel
easily.
Remove the bolts and store them in a clean
place.
Remove the wheel.
Ensure that the jack is stable. If the
ground is slippery or loose, the jack
might slip and drop.
Position the jack only at the locations
A
or
B
.
Ensure that the head of the jack is
positioned centrally on the jacking
location. Otherwise there is a risk of
damage to the vehicle and the jack may
drop.
Loading ...
Loading ...
Loading ...