Loading ...
Loading ...
Loading ...
Driving
188
Sequential mode
AUTO
disappears and the gears
engaged appear in succession in
the instrument panel screen.
The gear change requests are only carried out
if the engine speed permits.
It is not necessary to release the accelerator
during gear changes.
When braking or slowing down, the gearbox
changes down automatically to allow vehicle to
pull away in the correct gear.
When the vehicle has moved off, select
position
M
to change to sequential mode.
AUTO
and
1
or
R
appear in the
instrument panel screen.
At very low speed, if reverse gear is
requested, this will only be taken into
account when the vehicle is immobilised.
The
Foot on brake
warning lamp may
flash in the instrument panel to prompt
you to brake.
At high speed, if reverse gear is
requested, the
N
indicator lamp will flash
and the gearbox will change to neutral
automatically. To engage a gear again,
return the lever to position
A
or
A or A
M
.
On sharp acceleration, the gearbox will
not change up unless the driver acts on
the gear lever or the steering mounted
paddles.
Never select neutral
N
while the vehicle
is moving.
Only engage reverse gear
R
when the
vehicle is immobilised with the brake
pedal pressed.
If position
R
,
A
or
M
is selected, even
with the engine at idle, if the brakes are
released the vehicle moves without any
action on the accelerator. Never leave
children unsupervised in the vehicle
when the engine is running. When
carrying out maintenance on the vehicle
with the engine running, apply the
parking brake and select position
N
.
Loading ...
Loading ...
Loading ...