Loading ...
Loading ...
Loading ...
Fittings
128
High load retaining net *
To use it in row 1:
fold the rear seats,
open the covers of the upper fixings
1
,
unroll the high load retaining net,
position one of the ends of the net's metal
bar in the corresponding upper fixing
1
,
then do the same with the other end,
slacken the straps fully,
fix the snap hook of each of the straps
on the corresponding Top Tether ring
3
(located on the back of the folded rear side
seats),
tighten the straps,
check that the net is hooked and tightened
correctly.
To use it in row 2:
roll up or remove the load space screen,
open the covers of the upper fixings
2
,
unroll the high load retaining net,
position one of the ends of the net's metal
bar in the corresponding upper fixing
2
,
then do the same with the other end,
fix the snap hook of each of the straps in
the corresponding stowing ring
4
,
tighten the straps,
check that the net is hooked and tightened
correctly.
Hooked onto the special upper and lower
fixings, this permits use of the entire loading
volume up to the roof:
- behind the front seats (row 1) when the rear
seats are folded.
- behind the rear seats (row 2).
* If your vehicle is equipped with this.
When positioning the net, check that
the strap loops are visible from the
boot; this will make slackening or
tightening easier.
Loading ...
Loading ...
Loading ...