Loading ...
Loading ...
Loading ...
11
Practical information
221
Connect the compressor pipe directly to
the valve of the repaired wheel.
If this pressure has not been reached
after approximately five to ten minutes,
the tyre cannot be repaired; contact a
PEUGEOT or a qualified workshop to
have your vehicle repaired.
Connect the compressor's electric plug to
the vehicle's 12 V socket again.
Start the vehicle again and leave the
engine running.
Adjust the pressure using the compressor
(to inflate: switch
A
in position
"1"
; to
deflate: switch
A
in position
"0"
and
press button
B
), in accordance with the
vehicle's tyre pressure label (located on
the door aperture on the driver's side), then
remember to check that the leak is plugged
correctly (no further loss of pressure after
several miles [kilometres]).
Remove the compressor, then store the
whole kit.
Drive at reduced speed (50 mph [80 km/h]
max) for no more than approximately
125 miles (200 km).
Visit a PEUGEOT dealer or a qualified
workshop as soon as possible to have the
tyre repaired or replaced by a technician.
Loading ...
Loading ...
Loading ...