Loading ...
Loading ...
Loading ...
Safety
160
Seat belt unfastened warning
lamps display
When the ignition is switched on, with the engine
running or when the vehicle is moving at less than
12 mph (20 km/h), the corresponding warning
lamps
4
to
8
come on in red for approximately
30 seconds, if the seat belt is not fastened.
When the vehicle is moving at more than 12 mph
(20 km/h), the corresponding warning lamp
4
,
5
,
6
,
7
or
8
comes on in red, accompanied by an
audible signal and a message in the multifunction
screen, if a rear passenger has unfastened their
seat belt.
2
nd
row rear centre seat belt
Installation
Pull the strap and insert the tongue
A
in the
A in the A
right-hand buckle.
Insert the tongue
B
in the left-hand buckle.
Check the fastening of each buckle by
pulling the strap.
Removal and storing
Press the red button on the buckle
B
, then
on the buckle
A
.
Guide the strap as it reels in and bring the
tongue
B
, then
A
onto the magnet of the
attachment point on the roof.
3
rd
row rear seat belts
(7 seat version)
Installation
Pull the strap and insert the tongue
C
in the
buckle, on the boot side trim side.
Insert the tongue
D
in the opposite buckle.
Check the fastening of each buckle by
pulling the strap.
The seat belts for the rear seats of the
3
rd
row are incorporated at the corner of the
corresponding boot pillar and of the roof.
Removal and storing
Press the red button on the buckle
D
, then on
D , then on D
the buckle
C
.
Guide the strap as it reels in and the
tongues
D
and
C
.
The seat belt for the rear centre seat of the
2
nd
row is incorporated at the rear right of
the roof.
To prevent movement of the rear side
seat belts in the 2
nd row, slide the
straps into the guides provided for this
purpose.
Loading ...
Loading ...
Loading ...