Loading ...
Loading ...
Loading ...
Child safety
144
"ISOFIX" mountings
The ISOFIX mountings are three rings for each
seat:
- two rings
A
, located between the vehicle seat
back and cushion, indicated by a marking,
This ISOFIX mounting system ensures fast,
reliable and safe fitting of the child seat in your
vehicle.
The
ISOFIX child seats
are fitted with two
latches which are secured easily on the two
rings
A
.
Some also have an
upper strap
(or top tether)
which is attached to ring
B
.
To secure the child seat to the
TOP TETHER
:
- remove and stow the head restraint before
installing the child seat on this seat (refit it
after the child seat has been removed),
- remove the
TOP TETHER
cover by pulling
at its cut-out,
- pass the child seat strap behind the seat
backrest, centred between the holes for the
head restraint rods,
- secure the upper strap fixing to the ring
B
,
- tighten the upper strap.
5 seats
7 seats
Your vehicle has been approved in accordance with the
latest ISOFIX regulations
.
The seats, represented below, are fitted with regulation ISOFIX mountings:
- a ring
B
, located under a cover on the back
of the top of the seat backrest, referred to as
the
TOP TETHER
for fixing the upper strap.
TOP TETHER for fixing the upper strap. TOP TETHER
Its position is indicated by a marking.
Located on the back of the seat backrest, the
top tether is used to secure the upper strap of
child seats that have one. This device limits
forward tipping of the child seat, in the event of
a front impact.
Loading ...
Loading ...
Loading ...