Loading ...
Loading ...
Loading ...
32_ Installation Instruction
Connecting the water outlet hose
Fit the drainage hose of your machine to the drainage pipe
without bending.
If the length of the hose is not sucient, apply to the
authorized service for an extension made from the same
material as the original. Remember that the length of the hose
should not exceed 4meters even when with an extension.
If the drainage hose is longer the 4 m. the dishes will not be
cleaned properly secure your hose firmly to the drainage pipe
to avoid it coming o during the washing process.
Max 1000 mm
Min 400 mm
Min 120 mm
Min ø40 mm
Electrical connection
Before inserting the plug into the electrical socket, make sure that:
the socket is earthed and complies with current regulations;
the socket can withstand the maximum load of the appliance, which is indicated on the data
plate located on the inside of the door(see description of the appliance);
the power supply voltage falls within the values indicated on the data plate on the inside of
the door;
the socket is compatible with the plug of the appliance. If this is not the case, ask an
authorised technician to replace the plug (see assistance); do not use extension cables or
multiple sockets.
Once the appliance has been installed, the power supply cable and the electrical socket
should be easily accessible.
The cable should not be bent or compressed.
If the power supply cable is damaged, it must be replaced by the manufacturer or its
Technical Assistance Service in order to prevent all potential hazards.(See Assistance)
The company shall not be held responsible for any incidents that occur if these
regulations are not observed.
Installation instruction
DW4000KM-00000A-00_EN (Basic)_160323.indd 32DW4000KM-00000A-00_EN (Basic)_160323.indd 32 2016-03-23  1:14:332016-03-23  1:14:33
Loading ...
Loading ...
Loading ...