Loading ...
Loading ...
Loading ...
Prior Using for the First Time _13
03 PRIOR USING FOR THE FIRST TIME
Prior using for the first time
Before using your dishwasher for the first time:
A. Set the water softener
B. Loading the salt into the softener
C. Fill the rinse aid dispenser
D. Fill in detergent
Set the water softener
The water softener is designed to remove minerals and salts from the water, which would have a detrimental
or adverse eect on the operation of the appliance. The higher the content of these minerals and salts, the
harder the water is. The softener should be adjusted according to the hardness of the water in your area.
Your local Water Authority can advise you on the hardness of the water in your area.
Setting
The amount of salt dispensed can be set from H0 to H7.
Salt is not required at the set value H0.
1. Find out about the hardness value of your tap water. Your water utility company will help you
with this.
2. Set value can be found in the water hardness table.
3. Close the door.
4. Switch on "Power" switch.
5. Hold down "Delay" button and then press "Program" button (for freestnading dishwasher) or
"Start" button (for full built-in dishwasher) for 5 seconds. The buzzer rings one time and H.
ashes on the digital display. (factory setting is H4)
To change the setting:
1. Press "Delay" button.
Each time the button is pressed, the set value increasesby one level;when the value of H7
has been reached, the display jumps back to H0 (o ).
2. Press "Program" or "Start" button. The chosen setting has now been stored.
Contact your local water board for infor-mation on the hardness of your water supply.
Water hardness table
WATER HARDNESS
mmol/l Set value on the machine
°Clark Range
0~8 soft 0~1.1 H0
9~10 soft 1.2~1.4 H1
11~12 medium 1.5~1.8 H2
13~15 medium 1.9~2.1 H3
16~20 medium 2.2~2.9 H4
21~26 hard 3.0~3.7 H5
27~38 hard 3.8~5.4 H6
39~62 hard 5.5~8.9 H7
DW4000KM-00000A-00_EN (Basic)_160323.indd 13DW4000KM-00000A-00_EN (Basic)_160323.indd 13 2016-03-23  1:14:292016-03-23  1:14:29
Loading ...
Loading ...
Loading ...