Loading ...
Loading ...
Loading ...
Starting a Washing Programme _27
05 STARTING A WASHING PROGRAMME
Change the programme
Premise:
1. A cycle that is underway can only be modifi ed if it has only been running for a short time. Otherwise,
the detergent may have already been released, and the appliance may have already drained the wash
water. If this is the case, the detergent dispenser must be refi lled (see the section entitled "Fill in the
Detergent").
2. Press ”Power” button or "reset" button 3 seconds to cancel the programme, and turn on it again, then
you can change the programme to the desired cycle setting (see the section entitled "Starting a wash
cycle...") or press programme button while you press "reset" button.
If you open the door when washing, the machine pauses and warning alarm rings, the display appears
E1. When you close the door, the machine will keep on working after 10 seconds.
These programme lights show the state of the dishwasher:
a) One of the programme lights on --> cycle running
b) One of the programme lights blinking --> pause
If all the lights begin to glimmer, that indicates the machine is out of order, please turn o the main
power and water supply before calling a service.
Forget to add dish
A forgotten dish can be added any time before the detergent cup opens
1. Open the door a little to stop the washing.
2. After the spray arms stop working, you can open the door completely.
3. Add forgotten dishes.
4. Close the door, the dishwasher will work after ten seconds.
WARNING: It is dangerous to open the door when washing, because the hot water may scald you.
Switch O the Dishwasher.
The digital display appears "---" and the buzzer rings 6 times, only in this case the programme has
ended.
1. Switch o the dishwasher by pressing the "Power" button.
2. Turn o the water tap!
Open the door carefully. Hot steam may escape when the door is opened!
• Hot dishes are sensitive to knocks. The dishes should therefore be allowed to cool down around
15 minutes before removing from the appliance.
• Open the dishwasher's door, leave it ajar and wait a few minutes before removing the dishes. In
this way they will be cooler and the drying will be improved.
Unloading the dishwasher
It is normal that the dishwasher is wet inside.
Empty the lower basket first and then the upper one. This will avoid water dripping from the upper basket
onto the dishes in the lower one.
DW4000KM-00000A-00_EN (Basic)_160323.indd 27DW4000KM-00000A-00_EN (Basic)_160323.indd 27 2016-03-23 1:14:322016-03-23 1:14:32
Loading ...
Loading ...
Loading ...