Loading ...
Loading ...
Loading ...
4.3.5 Transferring the middle bearing elements
Fig. 11
u
Carefully detach the cover panel
Fig. 11 (30)
.
u
Turn the middle turn hinge
Fig. 11 (31)
with the washer
Fig. 11 (35)
through 180° and screw it firmly into place on
the new hinge side (with 4 Nm).
u
Turn the cover panel
Fig. 11 (30)
through 180° and snap it
into place again on the new handle side.
4.3.6 Distinguishing between bearing elements
Some appliances are height-adjustable, as can be noted from
the bearing pin in the lower turn hinge:
u
For appliances without
height adjustment,
continue with item
(see 4.3.7) .
u
For appliances with
height adjustment,
continue with item
(see 4.3.8) .
4.3.7 Transferring the lower bearing elements
For appliances without height adjustment
Fig. 12
u
Lift out the bearing pin
Fig. 12 (42)
together with washer
Fig. 12 (43)
and adjustable-height foot
Fig. 12 (44)
.
u
Lift out the stopper
Fig. 12 (41)
.
u
Unscrew
Fig. 12 (46)
the turn hinge
Fig. 12 (45)
.
u
Unscrew the bearing element
Fig. 12 (48)
, turn it through
180° and screw it firmly into place again inside
u
Carefully lift off the cover on the handle side
Fig. 12 (47)
and
transfer it to the opposite side.
u
Screw the bottom turn hinge
Fig. 12 (45)
firmly into place
(with 4 Nm) on the new hinge side, possibly using a cordless
screwdriver.
u
Re-insert the stopper
Fig. 12 (41)
into the other hole.
u
Re-insert the bearing pin
Fig. 12 (42)
together with the
washer and adjustable-height foot. In so doing, pay attention
that the locating lug points backwards
4.3.8 Transferring the lower bearing elements
For appliances with height adjustment
Fig. 13
u
Using the accompanying Allen key, unscrew the threaded
pin
Fig. 13 (60)
by about 1 turn.
u
Turn and lift out the bearing pin
Fig. 13 (42)
together with the
washer
Fig. 13 (43)
and adjustable-height foot
Fig. 13 (44)
.
u
Lift out the stopper
Fig. 13 (41)
.
u
Unscrew
Fig. 13 (46)
the turn hinge
Fig. 13 (45)
.
u
Fully unscrew the threaded pin
Fig. 13 (60)
and screw it in
on the opposite side, at the turn hinge, until it is flush outside
with the turn hinge.
u
Unscrew the bearing element
Fig. 13 (48)
, turn it through
180° and screw
Fig. 13 (49)
it firmly back into place.
u
Re-insert the stopper
Fig. 13 (41)
into the other hole.
u
Carefully lift off the cover on the handle side
Fig. 13 (47)
and
transfer it to the opposite side.
u
Screw the turn hinge
Fig. 13 (45)
firmly into place on the
new hinge side, possibly using a cordless screwdriver (with
4 Nm).
u
Screw the bearing pin
Fig. 13 (42)
into place again,
complete with washer and adjustable-height foot.
u
Tighten the threaded pin
Fig. 13 (60)
.
4.3.9 Transferring the handles
On both the top and bottom doors:
Putting into operation
8 * Depending on model and options
Loading ...
Loading ...
Loading ...