Loading ...
Loading ...
Loading ...
3 Controls and displays
3.1 Operating and control elements
Fig. 3
(1) Alarm button (14) On/Off button, wine zone
(2) SuperFrost button (15) Zone button
(3) On/Off button, freezer
compartment
(16) Light button
(4) Down setting button,
freezer compartment
(17) Fan button
(5) Up setting button,
freezer compartment
(18) Child lock symbol
(6) IceMaker symbol (19) Fan symbol
(7) Temperature display,
lower wine zone
(20) Menu symbol
(8) Temperature display,
upper wine zone
(21) HomeDialog symbol
(9) Upper wine compart-
ment symbol
(22) Lower wine compartment
symbol
(10) Light symbol (23) Freezer compartment
temperature display
(11) Power failure symbol (24) SuperFrost symbol
(12) Down setting button,
wine zone
(25) Alarm symbol
(13) Up setting button, wine
zone
3.2 Temperature display
The following are displayed in normal operation:
-
the average wine cabinet temperature
-
the warmest freezing temperature
The freezer compartment temperature display flashes:
-
the temperature setting is being changed
-
after switch-on the temperature is not yet cold enough
-
the temperature has risen several degrees
The wine zone temperature display flashes:
-
the temperature setting is being changed
-
after switch-on until the set temperature is reached
-
the wine cabinet temperature is too cold/too warm
Dashes flash in the display:
-
the freezer temperature is above 0 °C.
The following displays indicate malfunction. Possible causes
and corrective action (see Malfunction).
-
F0 to F9
-
FE
-
The LED of the power failure symbol
flashes.
4 Putting into operation
4.1 Transporting the appliance
CAUTION
Risk of injury and danger of damage as a result of incorrect
transport!
u
Transport the appliance in a packed condition.
u
Transport the appliance upright.
u
Do not transport the appliance without assistance.
WARNING
Risk of injury due to broken glass!
In case of transport at an altitude of over 1500 m the glass
panes of the door may break. The fragments have sharp edges
and may cause serious injury.
u
Take appropriate protective action.
4.2 Installing the appliance
WARNING
Fire hazard due to dampness!
If live parts or the mains lead become damp this may cause
short circuits.
u
The appliance is designed for use in enclosed areas. Do not
operate the appliance outdoors or in areas where it is
exposed to splash water or damp conditions.
WARNING
Risk of fire due to short circuit!
If the mains cable/connector of the appliance or of another
appliance touch the rear of the appliance, the mains cable/
connector may be damaged by the appliance vibrations,
leading to a short circuit.
u
Stand the appliance so that it is not touched by connectors
or main cables.
u
Do not plug the appliance or any others into sockets located
near the rear of the appliance.
WARNING
Fire hazard due to refrigerant!
The refrigerant R 600a is environmentally friendly but flam-
mable. Escaping refrigerant may ignite.
u
Do not damage the piping of the refrigeration circuit.
WARNING
Fire hazard and danger of damage!
u
Do not place appliances emitting heat e.g. microwaves,
toasters etc. on the appliance!
WARNING
Blocked ventilation openings pose a risk of fire and damage!
u
Always keep the ventilation openings clear. Always ensure
that the appliance is properly ventilated!
Controls and displays
* Depending on model and options 5
Loading ...
Loading ...
Loading ...