Loading ...
Loading ...
Loading ...
Using cold storage accumulators
u
Place the cold storage accumula-
tors in the top freezer compart-
ment to save space.
u
Place the frozen cold storage
accumulators on the frozen food
in the upper front area of the
freezer compartment.
5.5.10 IceMaker
The IceMaker is in the top drawer of the freezer compartment.
The drawer is marked “IceMaker”.
Make certain that the following conditions are met:
-
The appliance is level.
-
The appliance is connected.
-
The freezer compartment is switched on.
-
The IceMaker is connected to the water supply.
Switching on the IceMaker
Fig. 23
u
Pull out the drawer.
u
Press the On/Off button
Fig. 23 (1)
so that the LED
Fig. 23 (2)
shines.
u
Push in the drawer.
w
The LED of the IceMaker symbol
Fig. 3 (6)
shines.
Note
u
The IceMaker produces ice cubes only if the drawer is fully
closed.
Producing ice cubes
The production capacity depends on the freezer temperature.
The lower the temperature, the more ice cubes can be
produced in a specific period.
The ice cubes drop from the IceMaker into the drawer. When a
certain filling level has been reached, no further ice cubes are
produced. The IceMaker does not fill the drawer right up to the
brim.
If large quantities of ice cubes are needed, the complete
IceMaker drawer can be exchanged for the adjacent drawer.
When the drawer is closed, the IceMaker automatically re-
commences production.
Once the IceMaker has been switched on for the first time, it
may take up to 24 hours until the first ice cubes are produced.
Note
When the appliance is used for the first time and if it has been
out of use for a long time, particles may collect in the IceMaker
and/or water conduit.
u
Therefore do not use or consume the ice cubes made in the
first 24 hours.
Setting the water intake time
The opening time of the IceMaker valve can be set if, for
example, the water pressure in the pipe is too low or too high.
The water intake time can be set in stages from E1 (short intake
time) to E8 (long intake time). The intake is preset at E3.
u
To activate the setting mode: press the SuperFrost button
Fig. 3 (2)
for about 5 s.
w
The display indicates c.
w
Themenu symbol
Fig. 3 (20)
shines.
u
Using the Up setting button, freezer compartment
Fig. 3 (5)
and Down setting button, freezer compartment
Fig. 3 (4)
select E.
u
To confirm: briefly press the SuperFrost button
Fig. 3 (2)
.
u
To increase the water intake time: press the Up
setting button, freezer compartment
Fig. 3 (5)
.
u
To reduce the water intake time: press the
Down setting button, freezer compartment
Fig. 3 (4)
.
u
To confirm: press the SuperFrost button
Fig. 3 (2)
.
u
To deactivate the setting mode: press the On/Off button,
freezer compartment
Fig. 3 (3)
.
-or-
u
Wait for 5 minutes.
w
The temperature is indicated again in the temperature
display.
Switching off the IceMaker
If no ice cubes are needed, the IceMaker can be switched off
independently of the freezer compartment.
When the IceMaker is switched off, the IceMaker drawer can
also be used for freezing and storing food.
u
Press the On/Off button for about 1 second until the LED
goes out.
w
The LED of the IceMaker symbol
Fig. 3 (6)
goes out.
u
Clean the IceMaker.
w
This ensures that no water or ice remains in the IceMaker.
5.6 Wine zone
You can bring your wines to the ideal drinking temperature
slowly and gradually in the wine zone.
5.6.1 Storing wine bottles
41 Bordeaux bottles(0,75 l) can be stored in the wine zone.
u
Store white wine only in one compartment and red wine only
in the other, since both compartments can be set to inde-
pendent temperatures.
u
If possible, lay bottles of the same type of wine side by side
on the same grid shelf.
u
Rearrange bottles as seldom as possible.
u
Stored open bottles on the
folded down wooden grid
shelf.
u
To fold down the wooden
grid shelf: press the lock
under the trim sideways.
w
The wooden grid shelf folds
down.
5.6.2 Setting the temperature in the wine zone
The appliance is pre-set for normal operation. The temperature
can be set from 20 °C to 5 °C, the recommended temperatures
are 8 °C to 12 °C.
The wine zone is divided into two wine compartments, which
can be set to different temperatures, as needed.
u
To select the wine compartment: press the zone button
Fig. 3 (15)
.
w
The selected wine compartment is indicated in
the temperature display.
u
To set the temperature warmer: press the Up setting button,
wine zone
Fig. 3 (13)
.
u
To set the temperature colder: press the Down setting
button, wine zone
Fig. 3 (12)
.
Control
14 * Depending on model and options
Loading ...
Loading ...
Loading ...