Loading ...
Loading ...
Loading ...
USB input terminal (if so equipped)
5-102 Features and controls
5
1. Turn the ignition switch to the “OFF”
position or put the operation mode in
OFF.
2. Remove the commercially available USB
connector cable (D).
Be sure to hold the terminal part (A) of
the connector cable as shown in the illus-
tration.
3. Fix the connector cable on the clips and
close the glove compartment.
N00566900091
1. Park your vehicle in a safe place and turn
the ignition switch to the “OFF” position
or put the operation mode in OFF.
2. Open the glove compartment and remove
the connector cable (A, B) from clips (C).
3. Connect the Dock connector (D) to the
iPod (E).
WARNING
An open glove compartment door can
cause a serious injury or death to the front
passenger in an accident, even if the pas-
senger is wearing his/her seat belt. Always
keep the glove compartment door closed
when driving.
NOTE
Do not connect the USB memory device to
the vehicle’s connector cable directly.
The USB memory device may be damaged.
When closing the glove compartment, be
careful not to trap the connector cable and
USB memory device.
To remove
How to connect an iPod
To connect
NOTE
Use a genuine Dock connector from Apple
Inc.
On vehicles equipped with Mitsubishi Multi
Entertainment System (MMES), refer to the
separate “Mitsubishi Multi Entertainment
System owner’s manual” for details of con-
nection.
BK0212400US.book 102 ページ ２０１４年４月１日 火曜日 午後２時２１分
Loading ...
Loading ...
Loading ...