Loading ...
Loading ...
Loading ...
Tire pressure monitoring system (if so equipped)
Features and controls 5-59
5
The tire pressure monitoring system may not
work normally in the following circum-
stances:
A wireless facility or device using the
same frequency is near the vehicle.
Snow or ice is stuck inside the fenders
and/or on the wheels.
The tire inflation pressure sensor’s battery
is dead.
Wheels other than Mitsubishi Genuine
wheels are being used.
Wheels that are not fitted with tire infla-
tion pressure sensors are being used.
Wheels whose ID codes are not memo-
rized by the vehicle are used.
Compact spare tire (if so equipped) is fit-
ted on a road wheel.
A window tint that affects the radio wave
signals is installed.
N00532900153
If new wheels with new tire inflation pressure
sensors are installed, their ID codes must be
programmed into the tire pressure monitoring
system. Have tire and wheel replacement per-
formed by an authorized Mitsubishi Motors
dealer to avoid the risk of damaging the tire
inflation pressure sensors. If the wheel
replacement is not done by an authorized
Mitsubishi Motors dealer, it is not covered by
your warranty.
N00533000236
Your tire pressure monitoring system oper-
ates on a radio frequency subject to Federal
Communications Commission (FCC) Rules
(For vehicles sold in U.S.A.) and Industry
Canada Rules (For vehicles sold in Canada).
This device complies with part 15 of FCC
Rules and Industry Canada licence-exempt
RSS standard(s).
Operation is subject to the following two con-
ditions.
This device may not cause harmful inter-
ference
This device must accept any interference
received, including interference that may
cause undesired operation.
Do not use an aerosol puncture-repair spray
on any tire.
Such a spray could damage the tire inflation
pressure sensors.
Have any puncture repaired by an authorized
Mitsubishi Motors dealer.
Using the tire repair kit may damage the tire
inflation pressure sensor. The vehicle must
promptly be inspected and repaired by an
authorized Mitsubishi Motors dealer after
using the tire repair kit.
NOTE
NOTE
Tire inflation pressures vary with the ambi-
ent temperature. If the vehicle is subjected to
large variations in ambient temperature, the
tire inflation pressures may be under-inflated
(causing the warning light come on) when
the ambient temperature is relatively low. If
the warning light comes on, adjust the tire
inflation pressure.
Whenever the tires and wheels
are replaced with new ones
CAUTION
The use of non-genuine wheels will prevent
the proper fit of the tire inflation pressure
sensors, resulting air leakage or damage of
the sensors.
General information
WARNING
Changes or modifications not expressly
approved by the manufacturer for compli-
ance could void the user’s authority to
operate the equipment.
BK0212400US.book 59 ページ ２０１４年４月１日 火曜日 午後２時２１分
Loading ...
Loading ...
Loading ...