Loading ...
Loading ...
Loading ...
Bluetooth® 2.0 interface (if so equipped)
5-82 Features and controls
5
command operations using a defined voice
tree.
The Bluetooth
®
2.0 interface can be used
when the ignition switch or the operation
mode is in ON or ACC.
Before you can use the Bluetooth
®
2.0 inter-
face, you must pair the Bluetooth
®
device
and Bluetooth
®
2.0 interface. Refer to “Con-
necting the Bluetooth
®
2.0 interface and
Bluetooth
®
device” on page 5-87.
Bluetooth
®
is a registered trademark of
BLUETOOTH SIG, INC.
Steering control switch and microphone
P.5-83
Voice recognition function P.5-84
Useful voice commands P.5-85
Speaker enrollment function P.5-86
Connecting the Bluetooth
®
2.0 interface and
the Bluetooth
®
device P.5-87
Operating a music player connected via Blue-
tooth
®
P.5-91
How to make or receive hands-free calls
P.5-91
Phonebook function P.5-94
WARNING
Although the Bluetooth
®
2.0 interface
allows you to make hands-free calls, if you
choose to use the cellular phone while
driving, you must not allow yourself to be
distracted from the safe operation of your
vehicle. Anything, including cellular
phone usage, that distracts you from the
safe operation of your vehicle increases
your risk of an accident.
Refer to and comply with all state and
local laws in your area regarding cellular
phone usage while driving.
NOTE
For vehicles equipped with the F.A.S.T.-key,
if the operation mode is left in ACC, the
accessory power will automatically turn off
after a certain period of time and you will no
longer be able to use the Bluetooth
®
2.0
interface. The accessory power comes on
again if the engine switch is operated.
Refer to “ACC power auto-cutout function”
on page 5-14.
The Bluetooth
®
2.0 interface cannot be used
if the Bluetooth
®
device has a dead battery
or the device power is turned off.
Hands-free calls will not be possible if your
phone does not have service available.
If you place the Bluetooth
®
device in the
cargo area, you may not be able to use the
Bluetooth
®
2.0 interface.
Some Bluetooth
®
devices are not compatible
with the Bluetooth
®
2.0 interface.
You can confirm the Link System software
version by pressing the HANG-UP button 3
times (press and hold 2 times and then press
briefly) within 10 seconds.
For detail of the Bluetooth
®
2.0 interface,
refer to the following website:
[For vehicles sold in U.S.A.]
You can access the Mitsubishi Motors North
America website.
[For vehicles sold in Canada]
You can access the Mitsubishi Motors web-
site.
Please read and agree to the “Warning about
Links to the Web Sites of Other Companies”,
the websites mentioned above may connect
you to websites other than the Mitsubishi
Motors website.
http://www.mitsubishi-motors.com/en/prod-
ucts/index.html
Software updates by cellular phone/digital
audio device manufacturers may
change/alter device connectivity.
NOTE
BK0212400US.book 82 ページ ２０１４年４月１日 火曜日 午後２時２１分
Loading ...
Loading ...
Loading ...