Loading ...
Loading ...
Loading ...
Wiper and washer switch
Features and controls 5-79
5
N00504600298
To turn on the windshield washer, pull the
lever toward you with the ignition switch or
the operation mode is in ON or ACC.
The wipers will wipe automatically several
times when the washer fluid is sprayed.
To turn off the spray, release the lever.
N00523200408
The rear window wiper and washer can be
operated when the ignition switch or the
operation mode is in ON or ACC.
Turn the knob to operate the rear window
wiper.
N00523500254
Windshield washer
Rear window wiper and washer
OFF- Off
INT- The wiper operates continuously for
several seconds then operates inter-
mittently at intervals of about 8 sec-
onds.
-
Washer fluid will be sprayed onto
the rear window glass while the
knob is turned fully in either direc-
tion.
When the washer fluid is sprayed,
the wiper will automatically operate
2 or 3 times.
NOTE
On vehicles with CVT, to ensure a clear rear-
ward view, the wiper perform several contin-
uous operations when the reverse gear is
engaged and the switch is in the “INT” posi-
tion.
Following this continuous operation, the
wiper will automatically switch to intermit-
tent operation.
It is possible to modify functions as follows:
• Adjustment of the interval for intermittent
operation.
• Changing intermittent wiper operation to
continuous wiper operation.
See your authorized Mitsubishi Motors
dealer for details.
The washer fluid reservoir is located in the
engine compartment.
Check the fluid level regularly and refill if
necessary. (Refer to “Washer fluid” on page
9-9.)
Precautions to observe when
using wipers and washers
CAUTION
If the washer is used in cold weather, washer
fluid sprayed onto the glass might freeze,
blocking your view. Heat the glass with the
defroster before using the washer.
BK0212400US.book 79 ページ ２０１４年４月１日 火曜日 午後２時２１分
Loading ...
Loading ...
Loading ...