Loading ...
Loading ...
Loading ...
Multi-information display
Features and controls 5-69
5
1. When you lightly press the multi-informa-
tion display switch a few times, the infor-
mation display switches to the driving
range display.
Refer to “Information display” on page
5-63.
2. Each time you press the multi-information
display switch for 1 second or more on
driving range display, you can switch
reset mode for average fuel consumption.
(A: Auto reset mode, B: Manual reset
mode)
When the average fuel consumption is
being displayed, if you hold down the
multi-information display switch, these
calculations will be reset to zero.
When the following operation is per-
formed, the mode setting changes auto-
matically from manual to auto.
[Except for vehicles equipped with the
F.A.S.T.-key]
Turn the ignition switch to the “ON” posi-
tion from the “ACC” or “OFF” position.
[For vehicles equipped with the F.A.S.T.-
key]
Change the operation mode to ON from
ACC or OFF.
When the average fuel consumption is
being displayed, if you hold down the
multi-information display switch, these
calculations will be reset to zero.
When the engine switch or the operation
mode is in the following conditions, the
average fuel consumption display will
automatically reset.
[Except for vehicles equipped with the
F.A.S.T.-key]
The ignition switch has been set to the
“ACC” or “OFF” position for about 4
hours or more.
[For vehicles equipped with the F.A.S.T.-
key]
The operation mode has been set to ACC
or OFF for about 4 hours or more.
N00557100156
The fuel consumption display unit can be
changed. The distance and amount units are
also switched to match the selected fuel con-
sumption unit.
1. When you lightly press the multi-informa-
tion display switch a few times, the infor-
mation display switches to the average
fuel consumption display.
Refer to “Information display” on page
5-63.
2. Press and hold the multi-information dis-
play switch for about 5 seconds or more
until buzzer sound is heard twice.
Manual reset mode
Auto reset mode Manual reset mode
Auto reset mode
NOTE
The average fuel consumption display can be
reset separately for the auto reset mode and
for the manual reset mode.
Disconnecting the battery cable will erase
from memory the manual reset mode or auto
reset mode setting for the average fuel con-
sumption display.
The initial (default) setting is “Auto reset
mode”.
Changing the fuel consumption
display unit
BK0212400US.book 69 ページ ２０１４年４月１日 火曜日 午後２時２１分
Loading ...
Loading ...
Loading ...