Loading ...
Loading ...
Loading ...
MAINTENANCE AND SERVICE
547
Related information
•
Replacing the dipped beam bulb (p. 547)
•
Removing the headlamp's oval cover
(p. 548)
•
Bulb specifications (p. 550)
•
Ignition positions (p. 409)
Replacing the dipped beam bulb
The dipped beam bulb in halogen headlamps
can be replaced by the driver.
Before the bulb can be replaced, the oval cover
of the headlamp must be removed; see the sec-
tion "Removing the headlamp's oval cover".
IMPORTANT
Never touch the glass part of the bulbs with
your fingers. Grease from your fingers is
vaporised by the heat, coating the reflector
and then causing damage.
Left-hand headlamp.
1. Detach the headlamp's round rubber cover.
2. Unplug the connector from the bulb.
3. Detach the bulb by pushing it gently upwards
and pulling it straight out.
4. Fit a new bulb in the socket. The bulb's guide
pin must be aimed straight upwards.
5. Press in the connector.
6. Refit the headlamp's round rubber cover.
Related information
•
Bulb replacement (p. 545)
•
Bulb specifications (p. 550)
Loading ...
Loading ...
Loading ...