Loading ...
Loading ...
Loading ...
INSTRUMENTS AND CONTROLS
* Option/accessory.
151
Approach light duration
Approach lighting is switched on when the car is
unlocked and is used to switch on the car's
lighting at a distance.
When the function is activated with the remote
control key during unlocking, the position lamps,
lighting in outer handles*, number plate lighting,
interior roof lighting and floor lighting will switch
on. If a door is opened within the activation time,
the time for the lighting in the outside handles*
and the interior lighting will be extended.
The function can be deactivated/activated via the
centre display.
Related information
•
Home safe light duration (p. 150)
•
Remote control key (p. 236)
•
Settings in the centre display (p. 172)
Using windscreen wipers
The windscreen wiper cleans the windscreen.
Different settings for the windscreen wiper are
made with the right-hand steering wheel stalk
switch.
Right-hand stalk switch.
Thumbwheel, used to set rain sensor* sensi-
tivity and wiper swipe frequency.
Single sweep
Lower the stalk switch and release to
make one sweep.
Windscreen wipers off
Move the stalk switch to position 0 to
switch off the windscreen wipers.
Intermittent wiping
Set the number of sweeps per time unit
with the thumbwheel when intermittent
wiping is selected.
Continuous wiping
Raise the stalk switch for the wipers to
sweep at normal speed.
Raise the stalk switch further for the wip-
ers to sweep at high speed.
IMPORTANT
Before activating the wipers - ensure that the
wiper blades are not frozen in, and that any
snow or ice on the windscreen and rear win-
dow is scraped away.
IMPORTANT
Use plenty of washer fluid when the wipers
are cleaning the windscreen. The windscreen
must be wet when the windscreen wipers are
operating.
Related information
•
Activating/deactivating the rain sensor
(p. 152)
•
Windscreen and headlamp washers (p. 153)
•
Rear window wiper and washer (p. 153)
•
Wiper blades in service position (p. 550)
Loading ...
Loading ...
Loading ...