ECAM28465M User Manual

Loading ...

DISPLAYED MESSAGES

DISPLAYED MESSAGE POSSIBLE CAUSE SOLUTION

FILL TANK Insucientwaterinthetank. Fill the tank with water and/or insert it

correctly, pushing it as far as it will go until it

clicks into place.

EMPTY GROUNDS CONTAINER The grounds container (A22) is full.

Empty the grounds container and drip tray,

clean and replace. Important: when removing

the drip tray, the grounds container must be

emptied, even if it is not completely full.

If this is not done, when you make the next

coees, the grounds container may ll up more

than expected and clog the machine.

GROUND TOO FINE ADJUST

MILL

The grinding is too ne and the coee is

delivered too slowly or not at all.

The grinding is too ne and the coee is

delivered too slowly or not at all.

Repeat coee delivery and turn the grinding

adjustment dial (g. 10) one click clockwise to-

wards “7” while the coee mill is in operation.

If after making at least 2 coees delivery is

still too slow, repeat the correction procedure,

turning the grinding adjustment dial another

click until delivery is correct (see the section:

“Adjusting the coee mill” on page 12). If the

problem persists, make sure the water tank is

fully inserted, press the button and

deliver a little water from the spout.

INSERT GROUNDS CONTAINER After cleaning, the grounds container has not

been replaced.

Remove the drip tray and insert the grounds

container.

ADD PRE-GROUND COFFEE With the pre-ground function selected,

pre-ground coee has not been poured into

the funnel.

Place pre-ground coee in the funnel or

deselect the “pre-ground” function (g. 17).

DESCALE The machine must be descaled. The descaling procedure described in the

section “Descaling” needs to be performed as

soon as possible (page 17).

LESS COFFEE Too much coee has been used.

Select a milder taste by pressing the dial

(g. 9) or reduce the quantity of pre-ground

coee.

FILL BEANS CONTAINER The coee beans have run out. Fill the beans container (g. 13).

The pre-ground coee funnel is clogged. Empty the funnel with the help of a brush as

described in the section “Cleaning the pre-

ground coee funnel”.

INSERT INFUSER ASSEMBLY The infuser has not been replaced after

cleaning.

Insert the infuser as described in the

paragraph “Cleaning the infuser”.

INSERT TANK The tank is not correctly in place. Insert the tank correctly and press as far as it

will go.

Loading ...

User Manual - Page 21