Loading ...
Loading ...
Loading ...
9
Connecting the appliance
Important!
Check that the mains power supply voltage corresponds to
the value indicated on the rating plate on the bottom of the
appliance.
Connect the appliance to an earthed and correctly installed
socket with a minimum current rating of 10A only.
If the power socket does not match the plug on the appliance,
have the socket replaced with a suitable type by a qualied
professional.
Using the appliance for the rst time
Please note!
• Coee has been used to factory test the appliance and it
is therefore completely normal for there to be traces of
coee in the mill.
The machine is, however, guaranteed to be new.
• You should customise water hardness as soon as possible
following the instructions in the section “Setting the wa-
ter hardness” on page 18.
1. Insert the power cable connector into the socket at the
back of the appliance and connect the appliance to the
mains electricity supply (g. 1). Make sure the main
switch at the back of the appliance is pressed (g. 2).
Select the desired language by scrolling forwards or backwards
using the HOT MILK or LATTE button, or alternatively waiting
for the language options to scroll automatically on the display
(about every 3 seconds):
2. When “English” appears, press and hold the
button (g. 3) for a few seconds until “English set” is dis-
played.
Follow the instructions displayed by the appliance:
3. “FILL TANK!”: remove the water tank (g. 4), ll to the
MAX line with fresh water (g. 5) then replace in the ap-
pliance.
4. “INSERT WATER SPOUT!”: Check that the hot water spout is
inserted on the nozzle and place a container with a mini-
mum capacity of 100 ml underneath (g. 6).
5. “Hot water... Press OK?” is displayed;
6. Press the button to conrm (g. 3). The appliance
delivers water from the spout then goes o automatically.
The coee maker is now ready for normal use.
Please note!
• When using the appliance for the rst time, you need to
make 4-5 cups of coee or 4-5 cappuccinos before the ap-
pliance starts to give satisfactory results.
• When making the rst 5-6 cappuccinos, it is normal to
hear the noise of boiling water. After this, the noise be-
comes less.
• To enjoy your coee even more and improve the perfor-
mance of your appliance, we recommend installing a
water softener lter as described in the section “INSTALL
FILTER”. If your model is not provided with a lter, you can
request one from De’Longhi Customer Services.
TURNING THE APPLIANCE ON
Please note!
Before turning the appliance on, make sure the main switch on
the back of the appliance is pressed (g. 2).
Each time the appliance is turned on, it performs an automatic
preheat and rinse cycle which cannot be interrupted.
The appliance is ready for use only after completion of this
cycle.
Danger of burns!
During rinsing, a little hot water comes out of the coee spouts
and is collected in the drip tray underneath.
Avoid contact with splashes of water.
• To turn the appliance on, press the button (g. 7).
The message “Heating up... Please wait” is displayed.
After heating, the message “Rinsing...” is displayed. As well as
heating the boiler, the appliance also heats the internal circuits
by circulating hot water.
The appliance has reached the required temperature when a
message is displayed indicating the coee taste and quantity.
TURNING THE APPLIANCE OFF
Whenever the coee machine is turned o after being used to
make coee, it performs an automatic rinse cycle.
Danger of burns!
During rinsing, a little hot water ows from the coee spouts.
Avoid contact with splashes of water.
To turn the appliance o, press the button (g. 7). The ap-
pliance performs a rinse cycle, then the message “Turning o
underway Please wait...” is displayed and the appliance goes
o (standby).
Please note!
If the appliance is not used for an extended period, switch o
the machine at the main switch.
• rst turn the appliance o by pressing the button
(g. 8);
Loading ...
Loading ...
Loading ...