Loading ...
Loading ...
Loading ...
10
• release the main switch at the side of the appliance (g.
2).
Important!
Never press the main switch while the appliance is on.
MENU SETTINGS
When you access the programming menu by pressing the
MENU/ESC button, the following menu items are available:
Rinsing
Use this function to deliver hot water from the spout to heat
the internal circuit and make the coee delivered hotter.
To enable the function, proceed as follows:
1. Press the MENU/ESC button to enter the menu;
2. Press the HOT MILK or LATTE button (g. 8) until “Rins-
ing” is displayed;
3. Press the button. The message “Conrm?” is dis-
played;
4. Press the (g. 3): after a few seconds, hot water
ows out of the spout, heating the internal circuit and ma-
king the coee delivered hotter.
Please note!
Press any button to stop hot water delivery at any time.
Descale
For instructions on descaling, see page 17.
Install lter
For instructions on how to install the lter, see the section
“Installing the lter (page 18).
Replacing the lter
For instructions on how to replace the lter, see the section
“Replacing the lter” (page 19).
Adjust time
To adjust the time on the display, proceed as follows:
1. Press the MENU/ESC button to enter the menu;
2. Press the HOT MILK or LATTE button (g. 8) until “Adjust
time” is displayed;
3. Press the button (g. 3);
4. Press the HOT MILK or LATTE button (g. 8) to change
the hours;
5. Press the button to conrm;
6. Press the HOT MILK or LATTE button (g. 8) to change
the minutes;
7. Press the button to conrm.
This sets the time. Press the MENU/ESC button to exit the
menu.
Auto-start
You can set the auto-start time in order to have the appliance
ready at a certain time (for example in the morning) so you can
make coee immediately.
Please note!
To enable this function, the time must already have been set
correctly.
To enable Auto-on, proceed as follows:
1. Press the MENU/ESC button to enter the menu;
2. Press the HOT MILK or LATTE button (g. 8) until “Au-
to-start” is displayed;
3. Press the button. “Enable?” is displayed;
4. Press the button to conrm;
5. Press the HOT MILK or LATTE button to choose the hours;
6. Press the button to conrm;
7. Press the HOT MILK or LATTE button (g. 8) to change
the minutes;
8. Press the button to conrm;
9. Press the MENU/ESC button to exit the menu.
Once the time has been conrmed, enabling of auto-start is in-
dicated by the symbol displayed alongside the time and
under the Auto-start item in the menu.
To disable the function:
1. Select auto-start from the menu;
2. Press the button. “Disable?” is displayed;
3. Press the button to conrm.
The symbol is no longer displayed.
Auto-O
The time can be changed so that the appliance switches o
after 15 or 30 minutes, or after 1, 2 or 3 hours.
To re-programme Auto-o, proceed as follows:
1. Press the MENU/ESC button to enter the menu;
2. Press the HOT MILK or LATTE button (g. 8) until “Au-
to-o” is displayed;
3. Press the button;
4. Press the HOT MILK or LATTE button (g. 8) until the de-
sired operation time is displayed (15 or 30 minutes, or 1, 2
or 3 hours);
5. Press the button to conrm;
6. Press the MENU/ESC button to exit the menu.
Auto-o is programmed.
Cup warmer
This function enables or disables the cup warmer.
Proceed as follows:
1. Press the MENU/ESC button to enter the menu;
2. Press the HOT MILK or LATTE button (g. 8) until “Cup
warmer” appears on the display;
Loading ...
Loading ...
Loading ...