Loading ...
Loading ...
Loading ...
Cockpit72
The warning and information texts may be viewed in this menu. If there is no
warning or information message, the option Vehicle status is not displayed.
If there are several messages, each one is shown for a few seconds.
Example of menu use ⇒ page 66.
Note
If there are no warning messages, this menu is not available.
Configuration menu
This menu is used to make the settings for the vehicle func-
tions.
Open Configuration menu
– Select the option Configuration from the main menu: “Main
menu” and press button ⇒ page 66, fig. 43 on the wind-
screen wiper lever. or
– Press button or on the multifunction steering wheel*
⇒ page 66, fig. 44 until the Configuration menu is displayed.
Example of menu use ⇒ page 66
Note
• For electronic and vehicle equipment one or more of these menus will be
displayed.
Displayed on the screen Function
Multifunction display
data
This menu is used to establish the data in the
multifunction display menu to be displayed on
the dash panel ⇒ page 69
Convenience This menu allows you to make the settings for
the convenience functions in the vehicle.
OK
A
A
Lights and visibility From this menu it is it possible to alter the vehi-
cle lighting settings.
Time The hours and minutes of the clock and the navi-
gation system can be changed. Choose between
12 or 24-hour format and change to summer
time.
Winter tyres The menu allows the setting of a speed at which
an optical and acoustic warning will be given by
the system. You can use this function, for exam-
ple, if you have fitted winter tyres which are not
suited for the top speed of your vehicle. Please
see the section “Wheels and tyres”.
Settings: Language The display texts and the navigation system texts
can be seen in different languages.
Units This option allows you to select the units for dis-
playing temperature, fuel consumption values
and distances.
Aux. speed The dash panel also displays the speed in
another different unit of measurement (mph or
km/h) to that given on the speedometer.
Inter Service Consult service messages and reset service inter-
val display here.
Manufacturer's settings The manufacturer's predefined values for the
functions of this menu are restored.
Back
a)
This returns to the main menu
a)
Only of the windscreen wiper lever is used (MFD).
Freetrack_EN.book Seite 72 Donnerstag, 10. September 2009 10:33 10
Loading ...
Loading ...
Loading ...