Loading ...
Loading ...
Loading ...
If and when248
WARNING
Put the hazard warning lights on and place the warning triangle in position.
This is for your own safety and also warns other road users.
Caution
Take special care if you have to repair a tyre on a slope.
Note
Please observe legal requirements when doing so.
Tyre repair
The following sections describe the procedures for repairing
a tyre.
Using the sealing compound
– The instructions on the container give detailed information on
how to use the sealing compound.
Inflating the tyre.
– Remove the air compressor and hose from the container.
– Screw the retaining nut onto the valve.
– Plug the compressor cable into a 12 volt power point.
– Turn on compressor and monitor the pressure shown on the pres-
sure gauge.
Completing the repair
– Remove the compressor hose from the valve.
– Fit the valve cap.
– Unplug the compressor from the socket.
– Return all tools to their proper storing location.
Note
• If the vehicle is equipped with tyre pressure control, enter the new tyre
pressures using the SET button on the central console.
• The compressor should never be allowed to run for longer than 6
minutes.
Freetrack_EN.book Seite 248 Donnerstag, 10. September 2009 10:33 10
Loading ...
Loading ...
Loading ...