Loading ...
Loading ...
Loading ...
Heating, Ventilation and Air conditioning 161
Safety First Controls and equipment Practical tips Technical Data
Manual mode
In manual mode you can adjust the air temperature, air flow and distribution as required.
Switching on manual mode
– To enter manual mode, press one of the buttons ⇒ fig. 134 to
or press the air flow control . The selected function is
shown on the radio or navigator display.
Temperat ure
There are separate temperature selectors for the left and right sides of the
vehicle interior. The selected temperature is displayed above the selector.
The compartment temperature can be set between +18°C (64°F) and +26°C
(80°F). These are approximate temperatures and the actual temperature may
be slightly higher or lower depending on the ambient conditions.
If a temperature below 18°C (64°F) is selected, the display switches to LO In
this setting the system runs at maximum cooling output and the temperature
is not regulated.
If a temperature above 26°C (80°F) is selected, the display switches to HI In
this setting the system runs at maximum heating output and the temperature
is not regulated.
Blower
The air flow may be adjusted freely using the control . Always have the
blower running at a low setting to ensure a constant flow of fresh air into the
vehicle. Pushing the button
to the minimum -1, turns the Climatronic off.
Air distribution
The air distribution is adjusted using the buttons , and . It is also
possible to open and close some of the air vents separately.
Switching the air conditioning system on and off
When the button is on (LED lit), the heating, ventilation and air condi-
tioning system is on.
Fig. 134 On the instrument panel: 2C Climatronic
controls.
A
1
A
5
A
10
A
10
AC
Freetrack_EN.book Seite 161 Donnerstag, 10. September 2009 10:33 10
Loading ...
Loading ...
Loading ...