Loading ...
Loading ...
Loading ...
If and when256
– Remove the loops ⇒ page 255, fig. 181 in the direction of
the arrow and remove the cover.
– Remove the connector ⇒ page 255, fig. 182 from the bulb.
– Disengage the retainer spring ⇒ page 255, fig. 182 pressing
inwards to the right.
– Extract the bulb and fit the replacement so that the rim of the
attachment plate is on the reflector cut-out.
Main beam lights
– Raise the bonnet.
– Remove the cover ⇒ fig. 183 by pulling on this.
– Remove the connector ⇒ fig. 184 from the bulb.
–Press the spring ⇒ fig. 184 inwards and to the right.
– Extract the bulb and fit the replacement so that it sits correctly
into the cut-out on the reflector.
– Installation is done in the reverse order.
A
1
A
2
A
3
Fig. 183 Main beam
headlights
Fig. 184 Main beam
headlights
A
C
A
1
A
2
Freetrack_EN.book Seite 256 Donnerstag, 10. September 2009 10:33 10
Loading ...
Loading ...
Loading ...