Loading ...
Loading ...
Loading ...
If and when 245
Safety First Controls and equipment Practical tips Technical Data
Jack position points for vehicles with skirting*
Vehicles with plastic skirting, with cover*
– Remove the cap to access the anchor point for the vehicle jack
⇒ fig. 174.
–Pull on the cover and remove it from its allotment in the direction
of the arrow ⇒ fig. 174.
– Once the cover has been released, it will remain connected to its
strap so that is not lost.
Removing and fitting the wheel
For removal and fitting the wheel, the following tasks must be
completed.
After loosening the wheel bolts and raising the vehicle with the jack,
change the wheel as described below:
Removing a wheel
– Unscrew the bolts using the hexagonal tool in the handle of the
screwdriver (vehicle tool) and place them on a clean surface
⇒ fig. 175.
Fitting a wheel
– Screw in the wheel bolts and tighten them lightly using the
hexagonal socket in the screwdriver handle.
Fig. 174 Plastic skirting
with jack allotment cover
A
A
Fig. 175 Changing the
wheel: Hexagonal socket
in screwdriver handle to
turn the wheel bolts
Freetrack_EN.book Seite 245 Donnerstag, 10. September 2009 10:33 10
Loading ...
Loading ...
Loading ...