OWNER'S MANUAL - Page 255

For 2010.

Loading ...
Loading ...
Loading ...
If and when 253
Safety First Controls and equipment Practical tips Technical Data
Bulb change
General notes
Before changing any bulb, first turn off the failed component.
Do not touch the bulb glass. Fingerprints vaporise in the heat, causing a
reduction in the bulb life and condensation on the mirror surface, thus
reducing efficiency.
A bulb should only be replaced by one of the same type. The type is inscribed
on the bulb, either on the glass part or on the base.
It is highly recommended to keep a box of spare bulbs in the vehicle. At the
very least, the following spare bulbs, which are essential for road safety,
should be kept in the vehicle.
Main headlights
Dipped beam - H7
Main beam - H1
Position - W5W
Indicator - PY21W
Xenon headlights
22)
/self-directing
Dipped and full beam - D1S
23)
Daylight - P21W SLL
Position W5W
Indicators PY21W
15
Engine management 5
Pump relay 10
16 Right lighting 30
17 Horn 15
18 Vacant
19 Clean 30
20
Water pump 10
Pressure sensor pump for 1.8 engine 20
21
a)
Lambda probe
15
22 Brake pedal, speed sensor 5
23
a)
Engine management 5
Engine management 10
Engine management 15
24 AKF, gearbox valve 10
25
a)
ABS pump
40
26 Left lighting 30
27
a)
Engine management 40
Engine management 50
28 Vacant
29
a)
Electric windows (front and back) 50
Electric windows (front) 30
30 Ignition key 50
a)
Ampere rating according to motorisation
Number Consumer Amperes
22)
On this type of headlight, the bulb changes must be made by the SEAT dealer, given
that complex elements must be removed from the vehicle and a reset must be made
on the automatic control system incorporated.
23)
The Xenon bulbs discharge 2.5 times the light flux and have an average lifespan of 5
times more than that of halogen bulbs, this means that, except due to unusual circum-
stances, there is no need to change the bulbs for the whole life of the vehicle.
Freetrack_EN.book Seite 253 Donnerstag, 10. September 2009 10:33 10
Loading ...
Loading ...
Loading ...