Loading ...
Loading ...
Loading ...
7
The selected plate(s) and the corresponding
temperature(s) will appear on the LCD screen.
2. Turn the temperature dial for the selected
plate(s) to the desired setting – from Warm to
450°F. The temperature readout(s) in the LCD
screen will change as you turn the dial.
NOTE: Warm setting will display
as 200°F.
In the example below, the lower plate
temperature has been set to 350˚F.
3. Once the desired temperature setting(s) have
been selected, press the START/STOP button.
NOTE: If the START/STOP button is not
pressed within 10 minutes, the unit will enter
sleep mode. Turn any knob or press any button
to reactivate the unit.
a. The LED light around the START/STOP
button will illuminate and the unit will beep one
time.
b. In the LCD screen, PREHEAT will appear and
the selected temperature(s) will flash as the
plate(s) heat up. It may take up to 20 minutes to
reach operating temperature, depending on the
temperature(s) selected.
c. When the plate(s) reach temperature, the
selected temperature(s) will stop flashing,
READY will display, and the unit will beep 3
times.
NOTE: If both plates are selected, when the
first plate reaches temperature it will show
READY and the unit will beep 1 time; you can
begin cooking on this plate if you choose. The
second plate will continue to preheat until it
reaches temperature, at which time it will show
READY and the unit will beep 3 times.
In the example below, the upper plate
temperature has been set to 250˚F and is ready,
and the lower plate temperature has been set to
350˚F and is still preheating.
4. To change the temperature(s) at any time during
operation, simply turn the temperature dial of
the selected plate(s) to the new setting.
a. If the plate(s) are in PREHEAT mode, they will
continue to preheat to new selection.
b. If the plate(s) are in READY mode and the
temperature(s) are lowered, READY will remain
on display as the unit adjusts to the lower
temperature(s).
c. If the plate(s) are in READY mode and the
temperature(s) is raised, PREHEAT will display
and the higher selected temperature will flash
as the plate(s) heat up. Once the higher
temperature(s) is reached, READY will display,
the temperature(s) will stop flashing, and the
unit will beep 3 times.
5. To change the plate selection at any time during
operation, simply turn the PLATE SELECT dial
to the new selection and adjust the plate(s)
temperature (if necessary). PREHEAT will
display for new selected plate(s) and the
temperature will flash as the plate(s) heat up.
Once the new temperature(s) are reached,
READY will display, the temperature(s) will stop
flashing, and the unit will beep 3 times.
Loading ...
Loading ...
Loading ...