Loading ...
Loading ...
Loading ...
30
For general cleaning, use a cloth with hot soapy water.
For more dicult soils and built-up grease, apply a
liquid detergent directly onto the soil. Leave it on for 30
to 60 minutes. Rinse with a damp cloth and dry. Do not
use abrasive cleaners.
To avoid scratches, do not use steel wool pads.
1
Place a small amount of stainless steel appliance
cleaner or polish on a damp cloth or paper towel.
2
Clean a small area, rubbing with the grain of the
stainless steel if applicable.
Dry and bu with a clean, dry paper towel or soft
cloth.
4
Repeat as necessary.
• Use soapy water to thoroughly clean the oven door.
Rinse well. DO NOT immerse the door in water.
• You may use a glass cleaner on the outside glass of the
oven door. DO NOT spray water or glass cleaner on
the door vents.
• DO NOT use oven cleaners, cleaning powders, or
harsh abrasive cleaning materials on the outside of the
oven door.
• DO NOT clean the oven door gasket. The oven door
gasket is made of a woven material that is essential for
a good seal. Care should be taken not to rub, damage,
or remove this gasket.
Do not use harsh cleaners or harsh abrasive cleaning
materials on the outside of the oven door. Doing so can
cause damage.
Don’t hand clean
oven door gasket
Do hand clean door
• Do not store a soiled broiler pan or grid anywhere in
the range.
• Do not clean a broiler pan or grid in the self cleaning
mode.
• Remove the grid from the pan. Carefully pour out the
grease from the pan into a proper container.
• Wash and rinse the broiler pan and grid in hot water
with a soap-lled or plastic scouring pad.
• If food has burned on, sprinkle the grid with cleaner
while hot and cover with wet paper towels or a
dishcloth. Soaking the pan will remove burned-on
foods.
• Both the broiler pan and grid may be cleaned with a
commercial oven cleaner or in the dishwasher.
The oven light is a standard 40-watt appliance bulb. It
will turn on when the oven door is open. When the oven
door is closed, press the
button to turn it on or o.
1
Unplug the range or disconnect power and wait for
the oven and bulb to cool.
2
Turn the glass bulb cover in the back of the oven
counter-clockwise to remove it.
Turn the bulb counter-clockwise to remove it from
the socket.
4
Insert the new bulb and turn it clockwise.
5
Insert the glass bulb cover and turn it clockwise.
6
Plug in the range or reconnect the power.
• Make sure that the oven and bulb are cool.
• Disconnect the electrical power to the range at the
main fuse or circuit breaker panel. Failure to do so
can result in severe personal injury, death, or electrical
shock.
Loading ...
Loading ...
Loading ...