Loading ...
Loading ...
Loading ...
26
©
2019 DJI All Rights Reserved.
Remote Controller
Remote Controller Profile
Built into the remote controll is DJI's enhanced Wi-Fi technology, offering 2.4 GHz and 5.8 GHz*
transmission frequencies, a maximum transmission distance of 2.49 mi (4 km), and 720p video downlink
from the aircraft to DJI Fly on your mobile device. The detachable control sticks make the remote
controller easier to store. Refer to the remote controller diagram in the Product Prole section for more
information.
The built-in battery has a capacity of 2600 mAh and a maximum run time of 4.5 hours when using an
iOS device and 1 hour and 40 minutes when using an Android device. The remote controller charges
the Android device with a charging ability of 500 mA@5V. The remote controller automatically charges
Android devices.
* The MD1SD25 model remote controller can support both 2.4 GHz and 5.8 GHz. The MR1SS5 model remote
controller only supports 5.8 GHz.
Compliance Version: The remote controller is compliant with local regulations.
Control Stick Mode: The control stick mode determines the function of each control stick
movement. Three pre-programmed modes (Mode 1, Mode 2, and Mode 3) are available and
custom modes can be configured in DJI Fly. The default mode is Mode 2.
Using the Remote Controller
Powering On/Off
Press the power button once to check the current battery level.
Press once, then again and hold to turn the remote controller on or o. If the battery level is too low,
recharge before use.
Controlling the Camera
1. Record Button: Press to start/stop recording
(Video) or switch to video mode (Photo).
2. Shutter Button: Press to take photo (Photo)
or switch to photo mode (Video).
Charging the Battery
Use a Micro USB cable to connect the USB charger to the Micro USB port of the remote controller.
Record Button Shutter Button
Loading ...
Loading ...
Loading ...