Loading ...
Loading ...
Loading ...
14
©
2019 DJI All Rights Reserved.
Mavic Mini User Manual
1 Record Home Point 2 Conrming Home Point
4 Signal Lost for Extended Time
×
5
RTH (adjustable altitude)
Height over HP ≥ Failsafe Altitude
Elevate to Failsafe Altitude
Height over HP < Failsafe Altitude
Failsafe Altitude
×
6 Landing
×
3 Remote Controller Signal Lost
×
The aircraft cannot return to the Home Point if the GPS signal is weak or unavailable. If the GPS
signal become weak or unavailable after RTH is triggered, the aircraft will hover in place for a
while, and then start landing.
It is important to set a suitable RTH altitude before each flight. Launch DJI Fly, and then set the
RTH altitude. In Smart RTH and Low Battery RTH, the aircraft automatically ascends to the RTH
altitude. If the aircraft is at an altitude of 65 ft (20 m) or higher and has not yet reached the RTH
altitude, the throttle stick can be moved to stop the aircraft from ascending. The aircraft will fly
directly to the Home Point at its current altitude.
During RTH, the aircraft’s speed, altitude, and the orientation can be controlled using the remote
controller or DJI Fly if the remote controller signal is normal, but the direction of ight cannot be
controlled.
GEO zones will affect RTH.
The aircraft may not be able to return to a Home Point when the wind speed is too high. Fly with
caution.
5. After reaching the Home Point, the aircraft lands and the motors stop.
FailSafe RTH Illustration
Landing Protection
Landing Protection will activate during Smart RTH.
1. During Landing Protection, the aircraft will automatically detect and gently land on suitable ground.
2. If Landing Protection determines that the ground is not suitable for landing, Mavic Mini will hover and
wait for pilot conrmation.
3. If Landing Protection is not operational, DJI Fly will display a landing prompt when Mavic Mini
descends below 0.5 meters. Pull down on the throttle stick or use the auto landing slider to land.
Loading ...
Loading ...
Loading ...