Loading ...
Loading ...
Loading ...
37
1
Enter the Option Adjustment mode, refer
to the ‘Option Adjustment mode’ for
instructions.
Select the
COLD temperature from WASH TEMP
options.
CHANGING PRE-SET OPTIONS
Rinse options
You can change the pre-set rinse options on the
HEAVY DUTY and REGULAR cycles of
the WashSmart™ model, and on the HEAVY DUTY, REGULAR and WOOL cycles of the
QuickSmart™ model.
The default rinse option on these cycles is a spray rinse followed by a deep rinse. The first
step of the default rinse can be replaced with a short spin, or a deep rinse, by selecting
another option.
Enter Option Adjustment mode, select the preferred default rinse option using the Spin
Speed buttons.
If you have a problem with impurities in your water supply you may get a better result if
you change the rinse option to two
DEEP rinses. If you wish to conserve water, change the
rinse option to one DEEP rinse. If you want to conserve even more water, choose the ECO
option.
Controlled cold
WashSmart™ model only
If your cold water temperature is very low you will not get a very effective wash. The
CONTROLLED COLD option solves this problem by adding a small amount of hot water to
raise the temperature of the wash to approximately 20°C. We have called this CONTROLLED
COLD
.
RINSE OPTIONS
RINSE 1 RINSE 2
‘Med’ spin light on Deep rinse Deep rinse
‘Slow’ spin light on Short spin Deep rinse
‘Hold’ light on (default) Spray rinse Deep rinse
Loading ...
Loading ...
Loading ...