Loading ...
Loading ...
Loading ...
18 English
Installation requirements
Installation requirements
CAUTION
Do NOT lift or handle the unit by the cooktop frame.
C1
Fig. 1
C2
C3
C4
1. The counter top around the cut-out should be at and leveled (see hatched
area on Fig. 1).
2. Before installing the unit, measure the heights of the two cabinet sides
(C1
~
C4), front and back (See Fig. 1) from the oor to the top of the counter.
3. Level the range using the four leveling legs so that the height from the oor
to the underside of the cooktop frame is greater than the tallest cabinet
measurement by at least 1/16”.
4. Slide the unit into the cabinet (DO NOT PUSH THE UNIT HARD). Make sure the
center of the unit aligns with the center of the cabinet cut-out.
To avoid breakage
CAUTION: Please DO NOT push the
unit strongly when you install. These
actions can cause the damage to the
unit.
Please DO NOT grasp the knob and
push when you install.
(Grasp the L/R door area to push the
unit.)
Loading ...
Loading ...
Loading ...