Loading ...
Loading ...
Loading ...
English 15
Installation requirements
Location requirements
Clearances and dimensions
NOTE
For OTR over Gas Stove, please follow local GAS CODE.
BEFORE YOU BEGIN to install this appliance, refer to the following information,
dimensions, and clearances. Do not locate the range where it may be subject
to strong drafts. Provide adequate clearances between the range and adjacent
combustible surfaces. These dimensions must be met for safe use of the range.
The location of the electrical outlet and gas piping may be adjusted to meet the
following dimensions and clearances.
For installation in Canada, a free-standing range is not to be installed closer than
4.7” (12 cm) from any adjacent surface.
CAUTION
This range has been designed to comply with the maximum allowable wood
cabinet temperature of 194 °F (90 °C). Make sure the wall covering, countertops,
and cabinets around the range can withstand the heat (up to 194 °F [90 °C])
generated by the range. If not, discoloration, delamination, or melting may occur.
Installation requirements
Side
Clearance
Above
Cooking
Surface to
Wall
Overhead
Cabinet
Depth
Clearance
Below
Cooking
Top and at
Rear and
Sides of
Range
Lower
Cabinet
Depth
4”
(10.2 cm)
36”
(91.4 cm)
24”
(61 cm)
0” (0 cm)
0”
(15.2 cm)
13”
(33 cm)
6”
(15.2 cm)
18”
(45.7 cm)
30”
(76.2 cm)
23.2”
(58.9 cm)
30”
(76.2 cm)
30”
IMPORTANT: MAKE SURE the unit is supported by the leveling legs and NOT by
the cooktop itself.
Loading ...
Loading ...
Loading ...