Loading ...
Loading ...
Loading ...
31
TROUBLESHOOTING GUIDE
ERROR CODES (continued)
Problem Possible Cause Solutions
The display shows: If the rebalancing operation (see
above) is not successful, this error
will be displayed.
The automatic attempt to rebalance the load was not successful. The
cycle has been paused to allow the load to be manually adjusted.
The load is too small. Small loads may need additional items to be added to allow the
washer to balance the loads.
Heavy articles are mixed with
lighter items.
The load may have heavy items loaded with lighter items. Always try
to wash articles of somewhat similar weight to allow the washer to
evenly distribute the weight of the load for spinning.
The load is out of balance. Manually redistribute the load if articles have become tangled
preventing the automatic distribution from working properly.
The display shows:
Control error. Unplug the power cord and contact your nearest service center.
The display shows :
Water level is too high due to a
faulty water valve.
Close the water faucets, unplug the washer, and call for service.
The display shows: The water level sensor is not
working correctly.
Close the water faucets, unplug the washer, and call for service.
The display shows:
A motor error has occurred. Allow the washer to stand for 30 minutes and then restart the cycle. If
the LE error code persists, call for service.
The display shows:
It is time to run the Clean Washer
cycle.
Empty the tub, add a diluted solution of 1/4 cup bleach to 1 qt. water
to the tub, and select the Clean Washer cycle.
To skip the Clean Washer cycle when alerted, press the cycle selector
buttons. The message continues to appear for a few more wash cycles
and then disappears until the next scheduled cleaning cycle.
The display shows:
Pedestal washer is being operated
without a full-size washer.
Stacking switch is not working
properly.
The pedestal washer will not operate as a standalone unit. It must be
stacked under a full-size compatible Kenmore appliance.
The stacking switch will not operate properly if the unit is stacked
under a non-compatible Kenmore appliance, or a Kenmore appliance
manufactured before 2009.
Loading ...
Loading ...