Loading ...
Loading ...
Loading ...
15
HOW TO USE
CONTROL PANEL FEATURES
A
E
B C
WARNING:
To reduce the risk of re, electric shock, or injury to persons, read and follow this
entire Use & Care Guide, including the Important Safety Instructions, before operating this washer.
A
POWER (ON/OFF) BUTTON
Press to turn the washer ON. Press again to turn
the washer OFF. Pressing the POWER button
during a cycle will cancel that cycle and any load
settings will be lost. The drawer will unlock after a
brief pause.
NOTE:
If there is any water remaining in the tub after
the washer shuts off, it will drain following
4-minutes delay. The washer can be restarted
any time before the drain begins. However,
once the water begins to drain, all functions
will be suspended until the water has been
completely drained and the washer shuts off.
When the Power button is pressed, the Normal
cycle is selected by default. To modify the
default options or choose another cycle, press
the cycle selector (v) button to illuminate the
display.
B
CYCLE SELECTOR BUTTON
Press this button to select the desired cycle. Once
the desired cycle has been selected, the standard
presets will appear in the display. These settings
can be adjusted using the cycle setting buttons
any time before starting the cycle.
NOTE:
To protect your clothing, not all settings
are available on all cycle selections.
C
START/PAUSE BUTTON
Press this button to start the selected cycle. If the
washer is running, use this button to pause the
cycle without losing the current settings.
NOTE:
If you do not press the START/PAUSE
button within 4 minutes of selecting a cycle, the
washer automatically turns OFF and all cycle
settings are lost. Any water remaining in the tub
will be drained.
D
OPTION BUTTONS
Use these buttons to adjust the settings for the
selected cycle. The setting lights above the
buttons illuminate to show the current selection.
E
TIME AND STATUS DISPLAY
The display shows the cycle status and estimated
time remaining.
F
REMOTE CONTROL SENSOR
Use the remote to set the controls without bending
down to reach the control panel.
D F
Loading ...
Loading ...
Loading ...