Loading ...
Loading ...
Loading ...
33
Step 1: SBC 53
Activate Bluetooth
®
on your device (see chapter
4 "Preparing the measurement“, Bluetooth
®
).
Step 2: "HealthCoach" app
In the HealthCoach app, add the SBC 53 under
"Settings/My devices".
Step 3: SBC 53
take a measurement.
Step 4: SBC 53
data transfer immediately
following measurements.
•
If Bluetooth
®
data trans-
fer has been activated,
data is by transferred after
having confirmed the user
memory by pressing the
pressing the START/STOP
button .
Step 4: SBC 53
Data transfer at a later point:
•
Go to memory mode
(chapter 7). Select the
desired user memory. The
Bluetooth
®
transfer starts
automatically.
The HealthCoach app must be active to allow data transfer.
If your smartphone has a protective cover, remove this to en-
sure that there is no interference during the transfer. Begin the
data transfer in the HealthCoach app.
8. Cleaning and storing the device and cuff
•
Clean the device and cuff carefully using a slightly damp
cloth only.
•
Do not use any cleaning agents or solvents.
•
Under no circumstances hold the device and cuff under wa-
ter, as this can cause liquid to enter and damage the device
and cuff.
•
If you store the device and cuff, do not place heavy objects
on the device and cuff. Remove the batteries.
Loading ...
Loading ...
Loading ...